(Ipv6 Access-List Standard Filter) - Allied Telesis x310-26FT Command Reference Manual

X310 series stackable access switches for alliedware plus version 5.4.6-1.x
Table of Contents

Advertisement

IP
6 S
A
C
V
OFTWARE
CCESS
ONTROL
(
6
-
IPV
ACCESS
LIST STANDARD FILTER

(ipv6 access-list standard filter)

Overview
Use this ACL filter to add a filter entry for an IPv6 source address and prefix length
to the current standard IPv6 access-list. If a sequence number is specified, the new
entry is inserted at the specified location. Otherwise, the new entry is added at the
end of the access-list.
The no variant of this command removes a filter entry for an IPv6 source address
and prefix from the current standard IPv6 access-list. You can specify the filter
entry for removal by entering either its sequence number, or its filter entry profile.
[<sequence-number>] {deny|permit}
Syntax [icmp]
{<ipv6-source-address/prefix-length>|any}
no {deny|permit} {<ipv6-source-address/prefix-length>|any}
no <sequence-number>
Mode
IPv6 Standard ACL Configuration
Default
Any traffic controlled by a software ACL that does not explicitly match a filter is
denied.
Usage
The filter entry will match on any IPv6 packet that has the specified IPv6 source
address and prefix length. The parameter any may be specified if an address does
not matter.
NOTE
To add an ACL filter entry with sequence number 5 that will deny any IPv6 packets
Examples
to the standard IPv6 access-list named my-list, enter the commands:
awplus#
awplus(config)#
awplus(config-ipv6-std-acl)#
C613-50103-01 REV A
L
(ACL) C
IST
OMMANDS
)
Parameter
<sequence-number>
deny
permit
<ipv6-source-
address/prefix-
length>
any
: Software ACLs will deny access unless explicitly permitted by an ACL action.
configure terminal
ipv6 access-list standard my-list
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Description
<1-65535>
The sequence number for the filter entry of the selected
access control list.
Specifies the packets to reject.
Specifies the packets to accept.
IPv6 source address and prefix-length in the form X:X::X:X/P.
Any IPv6 source host address.
5 deny any
1475

Advertisement

Table of Contents
loading

This manual is also suitable for:

X310-26fpX310-50fpX310-50ft

Table of Contents