RIP C
OMMANDS
-
(RIP)
PASSIVE
INTERFACE
passive-interface (RIP)
Overview
Use this command to block RIP broadcasts on the VLAN interface.
Use the no variant of this command to disable this function.
Syntax
passive-interface <interface>
no passive-interface <interface>
Default
Disabled
Mode
RIP Router Configuration
Usage
This command can only be configured for VLAN interfaces.
Examples
Use the following commands to block RIP broadcasts on vlan20:
awplus#
awplus(config)#
awplus(config-router)#
Related
show ip rip
Commands
C613-50103-01 REV A
Parameter
Description
<interface>
Specifies the interface name.
configure terminal
router rip
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
passive-interface vlan20
817