Debug Mld - Allied Telesis x310-26FT Command Reference Manual

MLD MLD S C
AND NOOPING OMMANDS

DEBUG MLD

debug mld
Overview Use this command to enable all MLD debugging modes, or a specific MLD
debugging mode.
Use the no variant of this command to disable all MLD debugging modes, or a
specific MLD debugging mode.
Syntax debug mld {all|decode|encode|events|fsm|tib}
no debug mld {all|decode|encode|events|fsm|tib}
Mode Privileged Exec and Global Configuration
Usage This command applies to interfaces configured for MLD Layer-3 multicast
protocols and learned by MLD Snooping.
awplus#
Examples
awplus(config)#
awplus#
awplus(config)#
awplus#
awplus(config)#
awplus#
awplus(config)#
C613-50103-01 REV A
Parameter Description
all
Debug all MLD.
decode
Debug MLD decoding.
encode
Debug MLD encoding.
events
Debug MLD events.
fsm
Debug MLD Finite State Machine (FSM).
tib
Debug MLD Tree Information Base (TIB).
configure terminal
debug mld all
configure terminal
debug mld decode
configure terminal
debug mld encode
configure terminal
debug mld events
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
1143