Ip Pim Propagation-Delay - Allied Telesis x310-26FT Command Reference Manual

PIM-DM C
OMMANDS
-
IP PIM PROPAGATION DELAY

ip pim propagation-delay

Overview This command configures the PIM propagation-delay value. The PIM
propagation-delay is the expected delay in the transfer of PIM messages across
the VLAN interface that it is attached to.
Use the no variant of this command to return the propagation-delay to the
default (1000 milliseconds).
ip pim propagation-delay <delay>
Syntax
no ip pim propagation-delay
Default The propagation-delay is set to 1000 milliseconds by default.
Mode Interface Configuration for a VLAN interface.
awplus#
Examples
awplus(config)#
awplus(config-if)#
awplus#
awplus(config)#
awplus(config-if)#
C613-50103-01 REV A
Parameter Description
<delay>
<1000-5000> The value in milliseconds.
The default is 1000 milliseconds.
configure terminal
interface vlan2
configure terminal
interface vlan2
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
ip pim propagation-delay 2000
no ip pim propagation-delay
1340