Table of Contents
Advertisement
MLD
MLD S
C
AND
NOOPING
OMMANDS
6
SHOW IPV
MLD INTERFACE
show ipv6 mld interface
Overview
Use this command to display the state of MLD and MLD Snooping for a specified
interface, or all interfaces.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
Syntax
show ipv6 mld interface [<interface>]
Mode
User Exec and Privileged Exec
Example
The following command displays MLD interface status on all interfaces enabled for
MLD:
awplus#
Output
C613-50103-01 REV A
Parameter
Description
<interface>
Interface name.
show ipv6 mld interface
awplus#show ipv6 mld interface
Interface vlan1 (Index 301)
MLD Enabled, Active, Querier, Version 2 (default)
Internet address is fe80::215:77ff:fec9:7468
MLD interface has 0 group-record states
MLD activity: 0 joins, 0 leaves
MLD robustness variable is 2
MLD last member query count is 2
MLD query interval is 125 seconds
MLD querier timeout is 255 seconds
MLD max query response time is 10 seconds
Last member query response interval is 1000 milliseconds
Group Membership interval is 260 seconds
MLD Snooping is globally enabled
MLD Snooping is enabled on this interface
MLD Snooping fast-leave is not enabled
MLD Snooping querier is enabled
MLD Snooping report suppression is enabled
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
"Getting Started
Guide.
1172
Advertisement
Table of Contents
