Clear Hardware System-Flow - Dell S4810 Reference Manual

Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.0
Version 8.3.7.0
Version 7.8.1.0
Related show hardware stack-unit
Commands and output statistics of the designated component of the designated stack
member.

clear hardware system-flow

Clear system-flow statistics from selected hardware components.
S4810
Syntax
clear hardware system-flow layer2 stack-unit number port-set 0–
0 counters
Parameters
stack-unit
number
port-set 0–0
counters
Defaults none
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Debugging and Diagnostics
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
— displays the data plane or management plane input
Enter the keywords stack-unit then a number to select a
particular stack member and then enter one of the following
command options to clear a specific collection of data. The
range is 0 to 11 for the S4810.
Enter the keywords port-set along with a port-pipe
number, then the keyword counters to clear the system-flow
counters on the selected port-pipe. The range is 0 to 0 for
the S4810.
Introduced on the S6000.
601