Clear System Reboot - Dell PowerConnect J-EX4200-24T Software Manual

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS

clear system reboot

Syntax
Syntax (J-EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
204
clear system reboot
<both-routing-engines>
clear system reboot
<all-members>
<both-routing-engines>
<local>
<member member-id>
Command introduced before Junos OS Release 10.2 for J-EX Series switches.
Clear any pending system software reboots or halts.
—Clear all pending system software reboots or halts.
none
—(J-EX4200 switches only) (Optional) Clear all halt or reboot requests on
all-members
all members of the Virtual Chassis configuration.
—(Systems with multiple Routing Engines) (Optional) Clear all halt
both-routing-engines
or reboot requests on both Routing Engines. On a TX Matrix router, clear both Routing
Engines on all chassis connected to the TX Matrix router. Likewise, on a TX Matrix
Plus router, clear both Routing Engines on all chassis connected to the TX Matrix
Plus router.
local —(J-EX4200 switches only) (Optional) Clear all halt or reboot requests on the local
Virtual Chassis member.
member member-id —(J-EX4200 switches only) (Optional) Clear all halt or reboot requests
on the specified member of the Virtual Chassis configuration. Replace
with a value from 0 through 9.
maintenance
request system reboot on page 101
clear system reboot on page 205
When you enter this command, you are provided feedback on the status of your request.
member-id