Deleting The Operations Stored In The Memory (Delete) - Panasonic AV-HS450E Operating Instructions Manual

3. Basic operations

3-10-4. Deleting the operations stored in the memory (Delete)

 Press one of the buttons — [SHOT MEM], [BKGD WIPE MEM], [PinP MEM] or [CAM MEM] — to select the
corresponding memory whose operations are to be deleted.
The selected button lights in amber.
Depending on the operation that was performed last, the [STOR] button, [RECALL] button or [DEL] button
lights.
 Press the [DEL] button.
The [DEL] button lights in red.
The button of the number key containing the stored operations lights in green (or in amber with the AW
system).
 However, it will not light when [CAM MEM] is selected.
 Hold down (for about 2 seconds) the number key (1 to 10) used to delete the stored operations.
The button of the pressed number key goes off.
 As soon as the stored operations are deleted, the [UNDO] button becomes operable and lights in amber.
If the [UNDO] button is pressed while it is lit, the status before the stored operation is deleted will be
restored.
The [CAM MEM] button deletes specified preset numbers registered in the pan-tilt heads.
 When the [CAM MEM] button is selected, the [UNDO] button will have no effect so it will not light.
 To exit memory delete, press the [DEL] button or [SHOT MEM] button.
SHOT
1
STOR
MEM
1
BKGD
RE
WIPE
4
CALL
MEM
4
PinP
DEL
MEM
7
7
CAM
UNDO
10
MEM
10
MEMORY / PATTERN
88
PAGE
2 3
WIPE
2 3
SQ1 SQ2
5 6
SL1 SL2
3D1 3D2
5 6
BKGD
PATT
8 9
8 9
KEY
11 12
PATT
XPT DSBL EFF DSLV