Table of Contents
Advertisement
Quick Links
®
AV Control Unit with Receiver
Unité de commande AV avec récepteur
Unidad de control de audio-vídeo con receptor
CA-TU7000U
Operating Instructions
Manuel d'instructions
Manual de Instrucciones
¡Please read these instructions carefully before using this product and save this manual for future use.
¡Prière de lire ces instructions attentivement avant d'utiliser le produit et garder ce manuel pour l'utilisation ultérieure.
¡Lea con atención estas instrucciones antes de utilizar el producto y guarde este manual para poderlo consultar en el futuro.
Advertisement
Table of Contents
Related Manuals for Panasonic CA-TU7000U
Summary of Contents for Panasonic CA-TU7000U
-
Page 1: Manual De Instrucciones
® AV Control Unit with Receiver Unité de commande AV avec récepteur Unidad de control de audio-vídeo con receptor CA-TU7000U Operating Instructions Manuel d’instructions Manual de Instrucciones ¡Please read these instructions carefully before using this product and save this manual for future use. -
Page 2: Safety Information
Find the model number and serial number on either the back or bottom of the unit. Please record them in Model No. CA-TU7000U N° De Modèle the space below and retain this booklet as a perma- nent record of your purchase to help with identifica-... -
Page 3: Use This Product Safely
The product should be installed in a horizontal position with the front end up at a convenient angle, but not more than 30˚. Components XXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXX XXXXXXXXXXXXXX XXXXXXXXXXXXXXXX OO-OOOOO 1 set page 42) 1. AV Control Unit 2. Installation 3. Power Connector 4. Operating 5. Warranty Card,etc. Hardware Instructions CA-TU7000U... - Page 4 Caution: Record your registered ID code and keep it in a secure location. If you forget it, you will be unable to use the unit. In case that you can not operate the unit because of forgetting the ID code, please consult your nearest Panasonic Servicenter. ID Code Input Enter the ID code after turning on the power and activating the display.
-
Page 5: Name Of Controls And Functions
[ASP] (ASPECT) (P • MODE) ¡Selects the aspect ratio. page 26) ¡Activates/inactivates the private mode. [MODE] (POWER) page 28) ¡Switches on/off the power. page 14) ¡Changes the modes such as sound and picture. [NAVI] (NAVIGATION) page 14) ¡Activates/inactivates the navigation. page 22) CA-TU7000U... - Page 6 14) [A] (ASPECT) (P • MODE) [0] to [9] ¡Selects the aspect ratio. ¡Selects listening pattern. page 17 and 21) page 26) ¡Sets the ID code. page 34) ¡Activates/inactivates the private ¡Memorize broadcast stations. page 19) mode. page 28) CA-TU7000U...
- Page 7 Inserting your hands, fingers or foreign objects into MUTE the unit can cause injuries and damage to the unit. MUTE ON : Press [MUTE]. MUTE OFF : Press [MUTE] again. CA-TU7000U...
- Page 8 Raise : Press [TILT] again on the display unit. Note: Even when the unit is power off, you can fold down the display temporarily. Caution: Do not place any object on the display unit, or subject it to undue force. CA-TU7000U...
-
Page 9: Track Search
¡If you leave a CD at the CD slot for approximately 30 seconds, the CD is loaded into the compartment automatically after loud beep is energized three times. Cautions: ¡Do not use irregularly shaped CDs. ¡Do not insert foreign matter into the disc slots. CA-TU7000U... -
Page 10: Random Play
The first 10 seconds of each playing from the beginning. track plays in sequence. Press [5] (SCAN) again to cancel. Press [6] (REPEAT) Repeat Play Repeat the current selection. Press [6] (REPEAT) again to cancel. CA-TU7000U... -
Page 11: Radio Mode
[MODE] [[] (TUNE) : Up []] (TUNE) : Down Press and hold [[] (TUNE) or []] (TUNE) for more than 0.5 seconds, then release. Seeking will start. Note: The stereo indicator lights during reception of an FM stereo broadcast. CA-TU7000U... -
Page 12: Manual Preset
¡To stop the scanning, press [1] to [6] on the remote control. Note: New stations are overwritten on existing saved stations after following this procedure. Select a band (step q, w on the previous page) Preset Station Calling Press [1] to [6] on the remote control. CA-TU7000U... -
Page 13: Cd Changer Mode
CD Changer CD changer functions are designed for optional Mode Display Track Number Play Time Panasonic CD changer unit. Connect the CD changer, and load a magazine. Disc Number Number of Track Number of Disc The monitor shows “OVER B” when the number of tracks is 21 or more. -
Page 14: Track Scan
Press [6] (REPEAT) Track Repeat Press [6] (REPEAT) again to cancel. Repeat the current selection. Disc Repeat Press and hold [6] (REPEAT) again to Repeat the current disc cancel. Press and hold [6] (REPEAT) selection. for more than 2 seconds. CA-TU7000U... -
Page 15: Dvd Player
¡Connect a car navigation system. ¡Select a terminal in the "NAVIGATION SET UP" screen according to the terminal actu- ally connected to the car navigation sys- tem.(a page 30) [NAVI] (NAVIGATION) [MODE] DVD Player Preparation: Connect a DVD player. page 50) CA-TU7000U... - Page 16 VTR1-IN This Unit with CY-VMC7000U Control Unit Notes: ¡When you connect a Panasonic car navigation system with a built-in DVD player, use an RCA cord as well. CY-VMC7000U Display Unit ¡The sound that a Panasonic car navigation system generates comes from the speakers supplied with CY-VMC7000U.
-
Page 17: Rear View Camera
[]] [[] (Select) [ENTER] [MENU] Rear Seat Monitor You can have different picture and sound at the front monitor and rear monitor at the same time. Default : AUTO [MODE] Preparation: Connect another monitor. Operating Instructions for CY-VMC7000U page 44) CA-TU7000U... - Page 18 ¡The sound in the CD, radio and CD changer modes is not available at the rear seat monitor. ¡You can mute the sound from the rear speakers connected to the front seat monitor, so that you can have differ- ent modes at the front seat monitor and the rear seat monitor. page 28) CA-TU7000U...
-
Page 19: Useful Functions
Useful Functions CY-VMC7000U IN-DASH 7 WIDE COLOR LCD MONITOR / CD PLAYER DISC/BAND VOLUME NAVIGATION ASPECT TRACK/ ENTER YUNE MUTE MENU MODE NAVI POWER P·MODE [ASP] (ASPECT) Aspect Ratio (for VTR Mode) Default : Normal Mode: 4 types [A] (ASPECT) CA-TU7000U... - Page 20 ¡If you expand normal picture (4 to 3) by using “Just”, “Zoom” or “Full” aspect to the full of the screen, you might not see the periphery of the picture, or you might see deformed picture. Therefore, use the “Normal” mode when you see original picture in deference to picture-making purpose. CA-TU7000U...
- Page 21 IN-DASH 7 WIDE COLOR LCD MONITOR / CD PLAYER DISC/BAND VOLUME NAVIGATION ASPECT TRACK/ ENTER YUNE MUTE MUTE MENU MODE NAVI POWER P·MODE Private Mode [ASP] (P • MODE) [MUTE] Default : OFF [MUTE] [A] (P • MODE) Tone Enhancement (LOUD) Default : ON CA-TU7000U...
- Page 22 ¡When MAIN-IN is set to ON, Private Mode will be inactivated. When listening at low or medium volume, enhance bass and trebles tones. LOUD ON : Press and hold [MUTE] for more than 2 seconds. LOUD OFF : Press and hold [MUTE] again for more than 2 seconds. CA-TU7000U...
-
Page 23: User Setting
Navigation Set Up Select NAVI SETUP Default : Navigation input ... RGB Navigation volume ... 4 Navigation mute level ... –10 dB Note: You can set the Navigation volume and Navigation mute level when "RGB" is selected on Navigation input. CA-TU7000U... - Page 24 : Connected to the VTR1-IN : Connected to the VTR2-IN VTR2 NAVI VOLUME Navigation Volume : The sound that a Panasonic car navigation system (not available yet) generates does not come out. : Volume level high NAVI MUTE(dB) Navigation Mute Level...
-
Page 25: User Settings
ENTER ENTER YUNE YUNE MUTE MENU MENU MODE MODE NAVI MUTE MENU MODE NAVI POWER P·MODE POWER P·MODE Rear View Camera Select Set Up CAMERA IN Default : OFF Select USER Select Clock Setting CLOCK Default : Clock display...OFF CA-TU7000U... - Page 26 [[] minute []] hour Press [[] to adjust the minute. advance advance Hold []] or [[] to change numbers rapidly. blinks once SEC RESET Clock Re-adjustment Reset the clock to zero seconds. The clock display blinks once and clock starts. CA-TU7000U...
- Page 27 In case that you can not operate the unit because of forgetting the ID code, please consult your nearest Panasonic Servicenter. Note: Refer to ID Code Input regarding how to enter the ID code page 11).
- Page 28 ID code is entered, it is not possible to cancel the ID code function. w Press and hold [ENTER] until display the "Complete!". The ID code cancelling procedure is completed. The unit now works without an ID code. CA-TU7000U...
- Page 29 Button Operation Sound Default : ON Select Video Control Setting This “Video Control Setting” is required when Select you connect a Panasonic car navigation sys- tem with a built-in DVD player. (not available USER yet) Default : VTR1 Main Input...
- Page 30 VTR2 : Connected to the VTR2-IN Note: Select a terminal connected to the DVD output terminal of a Panasonic car navigation system with a built-in DVD player (not available yet) through an RCA cord. : No use of MAIN-IN (front/rear) terminal : Use of MAIN-IN (front/rear) terminal Note : Be sure to select “OFF”...
-
Page 31: Display Settings
Default : ± 0 Setting range : - 15 to + 15 Color Select COLOR Default : ± 0 Setting range : - 15 to + 15 Tint Select TINT Default : ± 0 Setting range : - 15 to + 15 CA-TU7000U... - Page 32 Increase the contrast between black and white. between black and white. Lighten Darken Lighten the depth of Deepen the depth of color on the display color on the display Emphasize red in Emphasize green in the color image the color image CA-TU7000U...
-
Page 33: Sound Settings
Bass / Treble Select TONE Default : ± 0 dB Setting range : - 12 dB to + 12 dB by 2 dB step Select SOUND Balance / Fader Select BAL/FAD Default : Center Setting range :15 levels for each CA-TU7000U... - Page 34 MENU MODE NAVI POWER P·MODE BASS Bass Adjustment Decrease the bass level. Increase the bass level TREBLE Bass Adjustment Increase the treble level Decrease the treble level FADER Fader Rear enhanced Front enhanced BALANCE Balance Left enhanced Right enhanced CA-TU7000U...
-
Page 35: Table Of Contents
Radio Antenna Extension the right which are packed with your unit. Cord ¡Warranty Card …… Fill this out promptly. ¡Panasonic Servicenter for Service Directory …… Keep for future reference in case the product needs servicing. ¡Installation Hardware …… Needed for installa-... -
Page 36: Before Installation
(RADIO), accessory (ACC), or ignition (IGN). ❏ Required Tools Battery Lead You’ll need a screwdriver, a 1.5 volt AA battery, and If your stereo unit has a yellow lead, you will need to the following: 12 V DC Electrical Side-Cut Test Bulb Tape Pliers CA-TU7000U... - Page 37 If the stereo unit functions properly with all these nector to the metal car chassis. connections made, disconnect the wires and pro- ceed to the final installation. Speakers Connect the speaker wires. See the wiring dia- gram for the proper hookups. Follow the diagram CA-TU7000U...
-
Page 38: Final Installation
6. Secure all loose wires after installing the unit. 7. Please carefully read the operating and installation instructions of the respective equipment before connecting it to this unit. Caution : Please follow the laws and regulations of your state, province or country for installation of the unit. CA-TU7000U... -
Page 39: Binding-Head Screw (M3 X 6 Mm)
Hook the cover with your nail. with the cover. w Slide the cover and remove it. Connect the control unit of the head unit (CY-VMC7000U) to this unit (CA-TU7000U). CA-TU7000U Guide q Slide the unit along the guides, and insert the connector in this unit securely. -
Page 40: Binding-Head Screw
Note : Some carpet materials may not be suitable for this mounting method. In this case, please contact your nearest Panasonic Servicenter for installation. i Velcro Tape ❑ Unit installation by using the Mounting Brackets t and the Base Brackets y. -
Page 41: Power Connector
Front Speaker Cord (Left) Navi Mute Lead NAVI MUTE Connect to the Navi Mute Lead of (Orange) the Panasonic car navigation system. (not available yet) Front Speaker Cord (Right) Note: Insulate the Navi Mute Lead with vinyl tape when you do not connect it. - Page 42 Note: Use the Radio Antenna Extension Cord !1 if necessary. Ground Terminal (Front) Power Connector Rear Front Rear Front Pre-Out (Front / Rear) CD Changer Control Connector MAIN-IN (Front / Rear) Connect the Digital Surround Processor (CY-AC300) Page 50) CA-TU7000U...
- Page 43 Rear Speaker Cord (Right) RCA Cord (option) (Right) REAR R (Violet / black stripe) (White) Front Speaker Cord (Left) (Left) FRONT L (White / black stripe) To Front Speaker (Gray) Front Speaker Cord (Right) (Right) FRONT R (Gray / black stripe) CA-TU7000U...
- Page 44 Pre-Out Cord (R)(Red) (L)(White) The pre-out cord of CY-VMC7000U (Video)(Yellow) does not have output when this unit CY-VMC7000U Control Unit (CA-TU7000U) is connected. CA-TU7000U AV Control Unit o Power Connector iR j iL j (Front) iR j iL j (Rear)
- Page 45 CD Changer Ground Lead CX-DP88U (Black) Power Connector (supplied to CX-DP88U) (L)(White) RCA Cord Battery Lead (Yellow) (R) (Red) BATTERY (Fuse 3A) CD changer Control Connector (Front) CY-VMC7000U Control Unit DIN Cord CA-TU7000U AV Control Unit (Rear) o Power Connector CA-TU7000U...
-
Page 46: Troubleshooting
Connect the grounding wire to a metal part of your car. Fuse is burnt. Call the store where you purchased the unit, or your nearest Panasonic Servicenter (see the attached sheet) and ask for fuse replacement. The volume is adjusted to zero. - Page 47 ¡CD is defective. ¡Mechanical trouble. CD is not ejected. Press [u]. If failure persists, press the reset switch. If normal operation is not restored, call the store where you purchased the unit or the nearest Panasonic Servicenter to ask for repairs. CA-TU7000U...
- Page 48 Make every adjustment of the screen. Something is wrong with the picture. The picture is light in color. This is a characteristic of liquid crystal panels and is not a problem. Red, blue, or green spots appears. CA-TU7000U...
-
Page 49: Remote Control
Press [u]. If failure persists, press the reset switch. If normal operation | E 3 | is not restored, call the store where you purchased the unit or the nearest Panasonic Servicenter to ask for repairs. No disc is in the player. NO DISC aInsert disc into the CD slot. -
Page 50: Replacing The Fuse
Product Servicing If the suggestions in the charts do not solve the problem, we recommend that you take it to your nearest authorized Panasonic Servicenter. The product should be serviced only by a qualified technician. Replacing the Fuse Use fuses of the same specified rating (15 amps). Using different substitutes or fuses with a higher rating, or connecting the product directly without a fuse, could cause fire or damage to the stereo unit. - Page 51 ¡A CD-RW disc is not playable. ¡MP3 file, video CD, CD-ROM and CD-EX disc are not playable. ¡Be sure to observe the handling instructions of CD-R disc. ¡Do not apply a disc that has a label printed by a commercially available label printer. CA-TU7000U...
-
Page 52: Specifications
: 530 - 1,710 kHz Usable Sensitivity : 28 dB / µV Image Rejection Ratio : 50 dB Above specifications comply with EIA standards. Note: Specifications and the design are subject to modification without notice due to improvements in technology. CA-TU7000U... - Page 53 Company, Division of Matsushita Division of Matsushita Electric of 5770 Ambler Drive, Electric Corporation of America Puerto Rico, Inc. (“PSC”) Mississauga, Ontario One Panasonic Way, Secaucus, Ave. 65 de Infanteria, Km. 9.5 L4W 2T3 New Jersey 07094 San Gabriel Industrial Park, Carolina, www.panasonic.ca http://www.panasonic.com...