Sav; Sre - Agilent Technologies 4288A Programming Manual

*SAV

Syntax *SAV <numeric>
Description
Saves the instrument setups to the register of the specified number on EEPROM. For
details of saved instrument setups, refer to Appendix D, "Initial Settings." (No query)
Parameters
Description
Range
Resolution
If the specified parameter is out of the allowable setup range, an error occurs.
Related commands *RCL on page 126
Equivalent key
[Save]
sequence

*SRE

Syntax *SRE <numeric>
*SRE?
Description
Sets the value of the Service Request Enable Register.
Parameters
Description
Range
Initial value
Resolution
If the specified parameter is out of the allowable setup range, the result of bitwise AND
with 255 (0xff) is set. Note that bit 6 cannot be set to 1.
Query response {numeric}<newline><^END>
Related commands *ESE on page 124
:STAT:OPER:ENAB on page 189
Equivalent key
No equivalent key is available on the front panel.
sequence
Chapter 10
Specified number
0 to 9
1
( - )
[Blue] [Rcl]
Setup value of the register
0 to 255
0
1
Command Reference
<numeric>
<numeric>
*SAV
127