DISPlay[:WINDow<1|2>]:SIZE LARGe|SMALl
Switches the measurement window between full screen and half screen.
This command is accepted, but takes no action and reports no error.
Remote Command
Example
Remote Command Notes
Preset
State Saved
Range
Backwards Compatibility SCPI
DISPlay[:WINDow<1|2>]:TEXT[:DATA] <string>
Specifies a comment (max. 20 characters) that can be displayed on the screen.
This command is accepted, but takes no action and reports no error.
Remote Command
Example
Remote Command Notes
Preset
State Saved
Backwards Compatibility SCPI
DISPlay[:WINDow<1|2>]:TEXT:STATe ON | OFF
Switches display of the comment (screen title) on or off.
This command is accepted, but takes no action and reports no error.
Remote Command
Example
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html
:DISPlay:WINDow[1]:SIZE LARGe|SMALl
:DISPlay:WINDow[1]:TRACe[1]|2|3:MODE?
DISP:WIND:SIZE LARG
DISP:WIND:SIZE?
FSP, FSU
SMALl
Saved in instrument state.
LARGe | SMALl
:DISPlay:SIZE
:DISPlay:WINDow[1]:TEXT[:DATA] <string>
:DISPlay:WINDow[1]:TEXT[:DATA]?
DISP:WIND:TEXT:DATA "123"
DISP:WIND:TEXT:DATA?
FSE, FSP, FSU
""
Saved in instrument state.
:DISPlay:TEXT[:DATA]
:DISPlay:WINDow[1]:TEXT :STATe ON|OFF|1|0
:DISPlay:WINDow[1]:TEXT :STATe?
DISP:WIND:TEXT:STAT ON
DISP:WIND:TEXT:STAT?
Compatible SCPI Commands
Supported SCPI Commands
109