Hitachi Compute Blade 2000 User Manual page 414

Check New Configuration or Add Configuration, and click Next.
2
The following screen appears:
Existing drive groups and disk arrays will remain

when you select Add Configuration. Add
Configuration should be selected when you
want to add disk arrays to an existing drive group,
or to build disk arrays using an additional hard
disk.
If you select New Configuration, you lose

existing drive groups and disk arrays. This should
be selected when you discard existing drive
groups and disk array to build a new one.
If you select New Configuration, the following

screen appears. Clicking Yes allows you to build
a disk array.
363