MegaRAID SAS 2208
Starting and ending MegaRAID WebBIOS
Use the following procedure to start the MegaRAID WebBIOS.
1
Turn on the power supply to the system equipment.
2
When the following screen appears, press and hold the Ctrl key, and press the
H key.
The MegaRAID WebBIOS is started.
LSI MegaRAID SAS-MFI BIOS
Version x.xx.xx (Build xxx xx, xxxx)
Copyright(c) 2008 LSI Corporation
HA -0 (Bus x Dev x) MegaRAID SAS 8708 ERI
FW package: x.x.x-xxxx
x Virtual Drive(s) found on the host adapter.
x Virtual Drive(s) handled by BIOS
Press <Ctrl><H> for WebBIOS
If the operating system has been started before you press the keys, shutdown
the operating system and then restart the system equipment. Check the
manual for ending your operating system because some operating systems,
such as Windows, require shutdown and other special operations when the
particular operating system is terminated.
The MegaRAID WebBIOS is started and Adapter Selection appears.
3
327