Hitachi Compute Blade 2000 User Manual page 393

Properties: Controller properties submenu 3
Click Next in the Properties: Controller properties submenu2 screen, and the
following screen appears.
Stop CC On Error, Schedule CC, Maintain PD Fail
History, and Disk Activity are not supported. Do not set
those items.
A
C
E
G
I
Setting item
A Stop CC On Error *1
B Schedule CC *1
Maintain PD Fail History
C
*1
D Stop On Error *2
E Controller BIOS
F Disc Activity *1
G Link Speed
Global Hot spare for
H
Emergency *1
Unconfigured for
I
Emergency *1
*1 Do not set this item, which is not supported.
*2 Make sure to use this item with the default setting.
Description
Sets an operation when an error is
detected at the consistency check.
Sets a consistency check schedule.
Sets whether or not a failed hard
disk can be used.
Sets whether or not to boot the OS
when an error is detected at the
consistency check.
Sets the disk array controller BIOS
Sets hard disk LED switching.
Sets the physical drive link speed.
Sets whether or not to rebuild a
different type of physical drive for
global hot spare.
Sets whether or not to rebuild an
unconfigured physical drive.
342
B
D
F
H
Setting/display value **
[No (continuous operation)] /
Yes (stops the consistency check.)
When clicking [Supported], the
screen moves to "Schedule CC
Page: Schedule Consistency
Check setting submenu".
[Enabled (Registers failed hard
disk information.)] /
Disabled (Not register failed hard
disk information.)
[Disabled)] / Enabled
[Enabled )] / Disabled
[Disabled)] / Enabled
Click [Manage] to go to Link
Speed: Link Speed submenu.
[Disabled)] / Enabled
[Disabled)] / Enabled