Advertisement
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Examples
The following command manually initiates a re-authentication of the 802.1X-enabled port.
console# dot1x re-authenticate ethernet g16
dot1x timeout quiet-period
The dot1x timeout quiet-period Interface Configuration mode command sets the number of
seconds that the Ethernet Switch Module remains in the quiet state following a failed
authentication exchange (for example, the client provided an invalid password). Use the no form of
this command to return to the default setting.
Syntax
dot1x timeout quiet-period seconds
no dot1x timeout quiet-period
•
seconds — Time in seconds that the Ethernet Switch Module remains in the quiet state
following a failed authentication exchange with the client. (Range: 0 - 65535 seconds)
Default Configuration
Period is 60 seconds.
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
•
During the quiet period, the Ethernet Switch Module does not accept or initiate any
authentication requests.
•
The default value of this command should only be changed to adjust for unusual
circumstances, such as unreliable links or specific behavioral problems with certain clients.
•
If it is necessary to provide a faster response time to the user, a smaller number than the
default should be entered.
345
802.1x Commands
Advertisement
