NEC Univerge SV8100 Features And Specifications Manual page 312

Issue 1.0
Define the outgoing call options for each trunk and user.
Set up a Conference with a co-worker in your immediate work area.
DISA and Tie Line users may use the Barge-In feature on a Conference call if they know the
service code and are permitted in their DISA/Tie Line Class of Service.
Meet Me Conference lets an extension user set up a Conference via Paging.
Meet Me Paging lets an extension user set up a two-party meeting via Paging.
A user can set up an Unsupervised Trunk-to-Trunk Conference and then drop out of the call,
allowing the remaining parties to continue the conversation. Establish two trunk calls, press
Hold and dial
You can optionally program Conf (Transfer) for Transfer. In this case, the Multiline Terminal
must have a Conference function key. The system also allows a call to be transferred into a
Conference call.
When the Conference Originator hangs up with a conference on Hold, or when trying to add
another caller, all internal calls are dropped.
Conferencing when talking on a Virtual Extension:
While talking on a Virtual Extension, if the station has an internal call on Hold, a
conference call cannot be established.
While talking on a Virtual Extension, if the station receives an intercom call (call to its
actual station number), a conference call cannot be established.
While talking on a Virtual Extension, if the station has a call on Hold, a conference call
cannot be established.
Default Setting
Enabled
System Availability
Terminals
Multiline and Single Line Terminals
Required Component(s)
None
2 - 288
8.
#
UNIVERGE SV8100
Conference