NEC Univerge SV8100 Features And Specifications Manual page 300

Issue 1.0
Related Features
Central Office Calls, Placing
Code Restriction
Station Message Detail Recording
Voice Response System (VRS)
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.
Level 2 – these are the next most commonly assigned programs for this feature.
Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
Program
Program Name
Number
11-11-34 Service Code Setup (for Setup/
Entry Operation) – Temporary Toll
Restriction Override
11-11-36 Service Code Setup (for Setup/
Entry Operation) – Toll
Restriction Override
20-08-06 Class of Service Options
(Outgoing Call Service) – Toll
Restriction Override
21-01-07 System Options for Outgoing
Calls – Toll Restriction Override
Time
21-07-01 Toll Restriction Override
Password Setup
21-14-01 Walking Toll Restriction
Password Setup – User ID
2 - 276
Description/Comments
If required, change the service code (775)
for Temporary Toll Restriction Override.
If required, change the service code (663)
for Toll Restriction Override.
Turns Off or On Toll Restricting Override
(Service Code 663).
Set the Toll Restriction Override Time.
After dialing the Toll Restriction Override
codes, the system removes Toll
Restriction for this Time.
Assign Toll Restriction Override codes to
extensions. Each code must have four
digits, using any combination of 0~9,
and . Each extension can have a
separate code, or many extensions can
share the same override code.
Enter the Walking Toll Restriction
Override User ID codes (six digits) into
tables. Up to 500 different override codes
can be entered.
UNIVERGE SV8100
Assigned Data
MLT, SLT
(default = 775)
MLT, SLT
(default = 663)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0~64800 (seconds)
(default = 10
seconds)
Maximum four digits
#
(0~9, , )
#
(default not
assigned)
Dial (Six digits)
(default not
assigned)
Code Restriction Override
Level
1 2 3