Code Restriction, Dial Block - NEC Univerge SV8100 Features And Specifications Manual

Hide thumbs Also See for Univerge SV8100:

Table of Contents

UNIVERGE SV8100

Code Restriction, Dial Block lets a user temporarily block dialing on an extension. This helps a user block

his or her phone from being used by another person while they are away from their desk. A usermust

enter a 4-digit personal code to enable/disable this feature.

Dial Block can also be set by the supervisor's access code. If Dial Block is set by an extension user, the

supervisor cannot release it. If Dial Block is set by the supervisor's code, the extension user cannot

Important: This function works by password and Class of Service control (the supervisor is not an

assigned extension). If Dial Block is available for all Classes of Service, everyone may become a

supervisor if they know the Dial Block password.

If the system is reset by a first initialize, the Dial Block feature is cleared.

This feature is not available for ISDN S-Bus extensions.

Both Program 21-09-01 (Code Restrict Class) and Program 21-10 (Dial Block Restriction

Class per Extension) can be set at the same time. However the system gives priority to the

setting in Program 21-10.

Dial Block can temporarily block an extension Code Restriction setting by changing to a

predefined table that has more restrictions.

Default Settings

System Availability

Required Component(s)

SV8100 Features and Specifications Manual

Code Restriction, Dial Block

Show Quick Links

Table of Contents