NEC Univerge SV8100 Features And Specifications Manual page 296

Issue 1.0
Program
Program Name
Number
21-05-12 Toll Restriction Class – PBX Call
Restriction
21-05-13 Toll Restriction Class –
Restriction of Tie Line Calls
21-06-01 Toll Restriction Table Data Setup
– International Call Restriction
Table
21-06-02 Toll Restriction Table Data Setup
– International Call Permit Code
Table
21-06-03 Toll Restriction Table Data Setup
– Maximum Number of Digits
Table Assignment
21-06-04 Toll Restriction Table Data Setup
– Common Permit Code Table
21-06-05 Toll Restriction Table Data Setup
– Common Restriction Table
21-06-06 Toll Restriction Table Data Setup
– Permit Code Table
21-06-07 Toll Restriction Table Data Setup
– Deny Restriction Table
21-06-08 Toll Restriction Table Data Setup
– PBX Access Code
21-21-01 Toll Restriction for Trunks
(Seized Trunk Basis Setting) –
Restriction Class
34-01-05 E&M Tie Line Basic Setup –
System Toll Restriction
2 - 272
Description/Comments
For the Toll Restriction Class you
select, Enable (1) or Disable (0)
PBX Call Restriction.
Select whether or not the Toll
Restriction set up in Program
34-08-01 is Enabled (1) or Disabled
(0).
Enter the international dialing codes
you want to restrict.
Enter the international dialing codes
you want to permit.
Select the maximum number of
digits allowed in outgoing calls for
each table (4~30).
Program codes into the Common
Permit Code Table.
Program codes into the Common
Restrict Code Table.
Program codes into the Permit
Code Tables.
Program codes into the Restrict
Code Tables (200 codes per table
maximum).
The system allows up to four tables
for PBX access codes. PBX
Access Codes can have up to two
#
digits, using 0~9, , and LINE
KEY 1 (don't care). Refer to the
PBX Compatibility feature for the
specifics.
Enter the Toll Restriction Class for
the selected trunk.
Determine if an incoming Tie Line
call should be subject to Toll
Restriction.
UNIVERGE SV8100
Assigned Data
1
1~4 =Table
0 = Disable (None)
Default:
1~6, 8~15 = 0
7 = 1
0 = Disable
1 = Enable
(default = 0)
Dial (Up to four digits)
default:
~
Tables 1 10 = No
Setting
Dial (Up to six digits)
Default:
Tables 1~20 = No
Setting
4-30
default:
Tables 1~ 4 = 30
Dial (Up to four digits)
default:
Table 1 = 000
Table 2~10 = Not
Assigned
Dial (Up to 12 digits)
default:
All Tables = Not
Assigned
Dial (Up to 12 digits)
default:
Table 1~4 = No Setting
Dial (Up to 12 digits)
default:
Table 1~4 = No Setting
Dial (Up to two digits)
default:
Table 1~4 = No Setting
1~15
(default = 1)
0 = No (Off)
1 = Yes (On)
(default = 0)
Code Restriction
Level
2 3