Actuator Control Cable Inspection - Toyota T100 1996 Service Manual

DI−458

Actuator Control Cable Inspection

INSPECTION PROCEDURE
1 Actuator control cable inspection.
CHECK:
(a) Check that the actuator and control cable throttle link are properly installed and that the cable and link
are connected correctly.
(b) Check that the actuator and bell crank are operating smoothly.
(c) Check that the cable is not loose or too tight.
OK:
Freeplay: less than 10 mm
HINT:
If the control cable is very loose, the vehicle's loss of speed going uphill will be large.
S
If the control cable is too tight, the idle RPM will become high.
S
1996 TOYOTA T100 (RM449U)
DIAGNOSTICS − CRUISE CONTROL SYSTEM
DI35E−01