INSPECTION PROCEDURE
1
Check starter operation.
CHECK:
Check that the starter operates normally and that the engine starts.
OK
2
Input signal check.
Input Signal
Clutch switch
Light
OFF (Depress
clutch pedal)
NG
1996 TOYOTA T100 (RM449U)
DIAGNOSTICS
Indicator Light
Blinking Pattern
SW ON
ON
SW OFF
OFF
−
CRUISE CONTROL SYSTEM
NG
Proceed to engine troubleshooting.
(3RZ−FE: See page DI−1)
(5VZ−FE: See page DI−127)
PREPARATION:
See input signal check on page DI−410.
CHECK:
Check the indicator light when clutch pedal is depressed.
OK:
The indicator light goes off when depressing the
clutch pedal .
OK
Proceed to next circuit inspection shown in
problem symptoms table (See page DI−419).
DI−447