Toyota T100 1996 Service Manual page 708

DI−444
INSPECTION PROCEDURE
1 Check starter operation.
CHECK:
Check that the starter operates normally and that the engine starts.
OK
2 Input signal check.
Input Signal
Turn PNP switch
Light
OFF (Shift to
except D position)
NG
1996 TOYOTA T100 (RM449U)
DIAGNOSTICS
Indicator Light
Blinking Pattern
SW ON
ON
SW OFF
OFF
− CRUISE CONTROL SYSTEM
NG Proceed to engine troubleshooting.
(3RZ−FE: See page DI−1)
(5VZ−FE: See page DI−127)
PREPARATION:
See input signal check on page DI−410.
CHECK:
Check the indicator light when shifting into except D position.
OK:
The indicator light goes off when shifting into except
D position.
OK Proceed to next circuit inspection shown in
problem symptoms table (See page DI−419).