D-Link DXS-3600 Series Reference Manual page 1018

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Parameters
counters
all
interface INTERFACE-ID [, | -]
queue QID [, | -]
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to display the CP information for the specified interface(s).
Example
This example shows how to display CP information for interface eth1/0/1 and with queue ID 1.
Switch# show qcn cp interface eth1/0/1 queue 1
Interface Id
CP Index
Status
CP Priority
CP Identifier
MAC Address
Queue Set Point
Feedback Weight
Minimum Sample-Base
Minimum Header-Octets
Switch#
This example shows how to display CP information for interface eth1/0/1 and with queue ID is 1.
Switch# show qcn cp counters interface eth1/0/1 queue 1
Int. CP
Id
--------
eth1/0/1
Switch#
(Optional) Specifies only to display CP counters.
Specifies to display CP information for all interfaces.
Specifies the interface to display QCN CP information. Specify multiple
interfaces, separated by commas or ranges by using a hyphen. No
space before and after the comma or hyphen.
(Optional) Specifies the queue ID that the CP is attached to. Specify
multiple CPs, separated by commas or ranges by using a hyphen. No
space before and after the comma or hyphen.
: eth1/0/1
: 2
: active
: 0
: 0011223344550101
: 00:11:22:33:44:55
: 26000
: 1
: 150000
: 0
CP
Idx Pri Discarded Frames
--- --- -------------------- -------------------- --------------------
1 0 18446744073709551615 18446744073709551615 18446744073709551615
Transmitted Frames
1018
Transmitted CNMs