Rmon Event - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
rising-threshold VALUE
RISING-EVENT-NUMBER
falling-threshold VALUE
FALLING-EVENT-NUMBER
owner STRING
Default
None.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
The RMON alarm facility periodically takes samples of the value of variables and compares them against
the configured threshold.
Example
This example shows how to configure an alarm entry to monitor an interface.
Switch# configure terminal
Switch(config)# rmon alarm 783 1.3.6.1.2.1.2.2.1.12.6 30 delta rising-threshold 20 1
falling-threshold 10 1 owner Name
Switch(config)#

84-4 rmon event

This command is used to configure an event entry. To remove an event entry, use the no form of this
command.
rmon event INDEX [log] [[trap COMMUNITY] [owner NAME] [description TEXT]
no rmon event INDEX
Parameters
INDEX
log
trap COMMUNITY
owner NAME
Specifies the rising threshold. The valid range is from 0 to
4294967295.
(Optional) Specifies the index of the event entry that is used to notify
the ringing threshold crossing event. The valid range is from 1 to
65535. If not specified, no action is taken while crossing the ringing
threshold.
Specifies the falling threshold. The valid range is from 0 to
2147483647.
(Optional) Specifies the index of the event entry that is used to notify
the falling threshold crossing event. The valid range is from 1 to 65535.
If not specified, no action is taken while crossing the falling threshold.
Specifies the owner string. The maximum length is 127.
Specifies the index of the alarm entry. The valid range is from 1 to
65535.
Specifies to generate log message for the notification.
Specifies to generate SNMP trap messages for the notification. The
maximum length is 127.
Specifies the owner string. The maximum length is 127.
1022