D-Link DXS-3600 Series Reference Manual page 1011

Dxs-3600 series layer 2/3 managed 10gigabit ethernet switch
Hide thumbs Also See for DXS-3600 Series:
Table of Contents

Advertisement

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
defense-mode-choice
Default
None.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
Use this command to specify the priority to be the Congestion Notification Priority Value (CNPV) and
configure the setting for this CNPV. When an IEEE 802.1p priority is assigned as a CNPV globally, the
CNPV configuration for all interfaces will be created with a default value. When a priority is deleted from
CNPV, the CNPV configuration for all interfaces will be deleted.
Example
This example shows how to assign the CoS priority 3 to CoS queue 2. Assign priority 3 as the CNPV and
take admin as the defense mode choice for newly created port entries.
Switch# configure terminal
Switch(config)# priority-queue cos-map 2 3
Switch(config)# qcn cnpv 3 cp-creation auto-disable
Switch(config)#
This example shows how to configure the priority 2 as the CNPV and administratively assign the defense
mode for all ports as Edge. Moreover, it assigns the default alternate priority to 1 for all ports.
Switch# configure terminal
Switch(config)# qcn cnpv 2 defense-mode-choice admin
Switch(config)# qcn cnpv 2 admin-defense-mode edge
Switch(config)# qcn cnpv 2 alternate-priority 1
Switch(config)#
83-5 qcn cnpv (interface)
This command is used to configure the QCN settings in the interface configuration mode.
qcn cnpv CNPV-PRIORITY-VALUE admin-defense-mode {disable | interior | interior-ready | edge}
qcn cnpv CNPV-PRIORITY-VALUE alternate-priority PRIORITY-VALUE
qcn cnpv CNPV-PRIORITY-VALUE defense-mode-choice {admin | auto | comp}
Parameters
(Optional) Specifies how to choose CND defense mode and alternate
priority for this CNPV on all ports. This setting can be overridden by
defense-mode-choice option of the per-interface command.
admin - The default CND defense mode and alternate priority are
specified by administrator.
auto - The default CND defense mode and alternate priority are
controlled automatically.
If not specified, the default defense mode choice is auto.
1011

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dxs-3600-32s

Table of Contents