Show Ip Bgp - D-Link DES-7200 Cli Reference Manual

Chapter 33 BGP4 Configuration Commands
Command
mode
Usage
guidelines
Examples
Related
commands
Platform
description
33.2 Showing Related Command
33.2.1

show ip bgp

Use this command to show the route information of BGP.
show ip bgp [{network | network-mask}] [longer-prefixes]
Parameter
description
33-76
BGP configuration mode.
A reasonable keepalive value cannot be greater than one-third of the
holdtime value.
If the time is configured for an individual peer or a peer group, that
peer or peer-group will use its time to replace the global time
configuration and connect the peer.
If the BGP peer group is specified, all members of the peer group
inherit the settings of this command. If this command is set for a
member of the peer, the setting will overwrite the setting for the
group.
DES-7210(config)# router bgp 65000
DES-7210(config-router)# timers bgp 80 240
Command Description
Set the keepalive and holdtime values on the
neighbor timers
basis of neighbors.
Parameter Description
Showing the specific routing information in the
network
routing table
Show the routing information included in the
network-mask
specified network.
Show the routing information of a route,
longer-prefixes
including the more specific routes included in it.
DES-7200 CLI Reference Guide