Show Ip Slb Probes - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

show ip slb probes

Displays the configuration of Server Load Balancing (SLB) probes.
show ip slb probes [probe_name]
Syntax Definitions
probe_name
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 9000E
Usage Guidelines
If you do not specify the name of an SLB probe then all SLB probes will be displayed.
Examples
No probe name is specified:
-> show ip slb probes
Probe Name
-----------------------+-------+-------+--------+------
web_server
mail_server
mis_servers
Output fields are described here:
output definitions
Probe Name
Period
Retries
Timeout
Method
The name of a probe that is not an HTTP/HTTPS probe is specified:
-> show ip slb probes mail_server
Probe mail_server
Type
Period (seconds)
Timeout (milliseconds)
Retries
Port
page 26-44
Specifies the name of the Server Load Balancing (SLB) probe.
Period Retries Timeout Method
60000 3 12000
60000 3 3000
3600000 5 24000
The user-specified name of the probe.
The period (in seconds) to check the health of servers.
The number of probe retries before deciding that a server is out of ser-
vice.
The timeout (in seconds) used to wait for probe answers.
The type of probe.
: SMTP,
: 60,
: 3000,
: 3,
: 0,
Server Load Balancing Commands
HTTP
SMTP
Ping
OmniSwitch CLI Reference Guide June 2012