Ipv6 Access-List - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

IPv6 Commands

ipv6 access-list

Creates an IPv6 access list that is used to specify multiple IPv6 addresses for a route map configuration.
ipv6 access-list access-list-name
no ipv6 access-list access-list-name
Syntax Definitions
access-list-name
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
Use the no form of this command to delete the access list.
Examples
-> ipv6 access-list access1
-> no ipv6 access-list access1
Release History
Release 7.1.1; command was introduced.
Related Commands
ipv6 access-list address
show ipv6 access-list
MIB Objects
alaRouteMapAccessListNameTable
alaRouteMapAccessListName
alaRouteMapAccessListNameIndex
alaRouteMapAccessListNameAddressType
alaRouteMapAccessListNameRowStatus
OmniSwitch CLI Reference Guide
Name of the IPv6 access list (up to 20 characters).
Adds IPv6 addresses to an existing IPv6 access list.
Displays the contents of an IPv6 access list.
March 2011
ipv6 access-list
page 11-63