Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual page 625

IPv6 Commands
•
Use this command multiple times with the same access list name to add multiple addresses to the exist-
ing IPv6 access list.
Examples
-> ipv6 access-list access1 address 2001::1/64 action permit
-> ipv6 access-list access1 address 2001::1/64 redist-control aggregate
-> no ipv6 access-list access1 address 2001::1/64
Release History
Release 7.1.1; command was introduced.
Related Commands
ipv6 access-list
show ipv6 access-list
MIB Objects
alaRouteMapAccessListTable
alaRouteMapAccessListIndex
alaRouteMapAccessListAddress
alaRouteMapAccessListAddressType
alaRouteMapAccessListPrefixLength
alaRouteMapAccessListAction
alaRouteMapAccessListRedistControl
alaRouteMapAccessListRowStatus
OmniSwitch CLI Reference Guide
Creates an IPv6 access list that is used to specify multiple IPv6
addresses for a route map configuration.
Displays the contents of an IPv6 access list.
March 2011
ipv6 access-list address
page 11-65