Show Ipv6 Tunnel 6To4 - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

show ipv6 tunnel 6to4

show ipv6 tunnel 6to4
Displays IPv6 tunnel information and whether the 6to4 tunnel is enabled.
show ipv6 tunnel 6to4
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
N/A
Examples
-> show ipv6 tunnel 6to4
tunnel_6to4
Status = Disabled
IPv6 Address(es):
Local IPv4 Address(es):
output definitions
Name
Status
IPv6 Address(es)
Local IPv4 Addresses(es)
Release History
Release 7.1.1; command was introduced.
Related Commands
ipv6 interface
MIB Objects
alaIPv6ConfigTunnelTable
alaIPv6Tunnel6to4
alaIPv6ConfigTunnelv4Source
alaIPv6ConfigTunnelv4Dest
page 11-56
Indicates whether 6to4 tunneling is enabled or disabled on the switch.
Tunnel ID.
IPv6 address associated with the tunnel.
Source IPv4 address for the tunnel.
Configures an IPv6 interface on a VLAN or IPv6 tunnel.
OmniSwitch CLI Reference Guide
IPv6 Commands
March 2011