Table 17: Service Ingress Qos Policy Ip Match Criteria In 7210 Sas-M Network Mode - Alcatel-Lucent 7210 SAS M OS Quality Of Service Manual
Hide thumbs
Also See for 7210 SAS M OS:
- Service manual (952 pages) ,
- Configuration manual (558 pages) ,
- Interface configuration manual (347 pages)
Table of Contents
Advertisement
QoS Overview
Table 17: Service Ingress QoS Policy IP Match Criteria in 7210 SAS-M network mode
• DSCP value (available for SAPs in VPLS,
VLL, PBB Epipe I-SAP, PBB VPLS I-SAP,
IES and VPRN services)
Table 19:
• IEEE 802.1p/Dot1p value/mask, Source MAC
address/mask, Destination MAC address/mask,
EtherType Value/Mask (available for VLL, VPLS,
PBB (Epipe I-SAP, VPLS I-SAP, B-SAP), IES and
VPRN services.
Service Ingress QoS Policy IPv6 Match Criteria in 7210 SAS-M network
mode
modeService Ingress QoS Policy IP Match Criteria in 7210 SAS-M access-uplink mode
• DSCP value (available for SAPs in VPLS, VLL, and
PBB services)
Page 50
IP Criteria
Service Ingress QoS Policy MAC Match Criteria in 7210 SAS-M network
MAC Criteria
IPv6 Criteria
IP source and mask, IP destination and mask,
IP protocol, TCP/UDP source port, TCP/UDP
destination port,
(available only for SAPs in VPLS, VLL, PBB
Epipe I-SAP, PBB VPLS I-SAP, IES and
VPRN services)
IPv6 128-bit source and mask, IPv6
128-bit destination and mask, IP
protocol/next-header, TCP/UDP
source port, TCP/UDP destination
port, (available only for SAPs in
VPLS, VLL, PBB Epipe I-SAP,
PBB VPLS I-SAP)
7210 SAS M OS Quality of Service Guide
Advertisement
Table of Contents
