Show Ipv6 Tunnel Configured - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

show ipv6 tunnel configured

show ipv6 tunnel configured
Displays IPv6 tunnel information and whether the 6to4 tunnel is enabled.
show ipv6 tunnel configured
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
N/A
Examples
-> show ipv6 tunnel configured
IPv6 6to4 tunnel: Enabled
Configured Tunnels:
Tunnel
-------------------+-----------------------------+---------------+-----------------
1
23
v6if-tunnel-137
output definitions
IPv6 6to4 tunnel
Tunnel
IPv6 Address/Prefix Length
Source IPv4
Destination IPv4
Release History
Release 7.1.1; command was introduced.
page 11-54
IPv6 Address/Prefix Length
2001:0000:0200::101/48
2001:0000:0200::102/48
fe80::2d0:95ff:fe12:f470/64
Indicates whether 6to4 tunneling is enabled or disabled on the switch.
Tunnel ID.
IPv6 address associated with the tunnel.
Source IPv4 address for the tunnel.
Destination IPv4 address for the tunnel.
Source IPv4 Destination IPv4
192.16.10.101 192.28.5.254
192.15.10.102 10.27.105.25
212.35.35.35 212.104.138.137
OmniSwitch CLI Reference Guide
IPv6 Commands
March 2011