Map The Iso File On A Vxflex Ready Node 14G Server; Install The Windows Os On A Vxflex Ready Node Server - Dell EMC VxFlex Ready Node 14G Manual

Map the ISO file on a VxFlex Ready Node 14G server

Install the Windows OS on a VxFlex Ready Node server

Virtual Disk Size: 111/222 GB
l
Name: OS
l
Would you like to create this virtual disk: Yes
l
10. Exit System Setup and boot to the OS.
Results
The BOSS-S1 Configuration Utility > Operation Menu screen displays one virtual
disk with the specified name.
Map the ISO file on a VxFlex Ready Node 14G server.
Before you begin
Ensure that you can access the console.
Procedure
1. Open the KVM console, using the Launch link.
2. In the DELL System Setup screen, select Virtual Media
Media.
The Initializing connection screen is displayed with a connecting message.
You may have to wait for some time for the connecting message to finish.
3. In the DELL System Setup screen, select Virtual Media
4. From the Virtual Media - Map CD/DVD screen, browse and set up the ISO file
and then click Map Device.
5. To verify the ISO file selection, click Virtual Media and view the ISO selection
in the drop down list.
6. Reset the server:
a. In the main DELL System Setup console window, select Power
System (warm boot) to display the list of keyboard keys with related
functionality.
b. Refer to the best practices of DELL OS installation:
Operating System on Dell PowerEdge
Ensure that you select the BOSS device as the OS install target drive.
The server boots using the OS ISO file and finishes the installation.
Install the Windows operating system and Hyper-V on a server in the VxFlex Ready
Node system.
Before you begin
Ensure that you have configured the BIOS, as described in
IP address and BIOS on page 18.
Procedure
1. Open a console to the server.
Servers.
Map the ISO file on a VxFlex Ready Node 14G server
Installing the Operating System
Connect Virtual
>
Map CD/DVD.
>
Rest
>
How to Install an
Set up the BMC (iDRAC)
27