Enabling Differentiated Services; Monitoring Diffserv; Using The Show Class-Map Command - Dell Force10 S2410-01-10GE-24P Configuration Manual

Figure 12-141. service-policy Interface Command Example
Force10 #config
Force10 (Config)#interface 1/0/4
Force10 (Interface 1/0/4)#service-policy in pm-1
Force10 (Interface 1/0/4)#
Note: When applied globally, a service-policy command appears under each interface, as if
the command were applied one interface at a time. The commands then can be removed from
individual interfaces, or from all interfaces simultaneously, using the no form of the command.

Enabling Differentiated Services

To use DiffServ, it must be enabled globally with the command
operational mode to active. While disabled, the DiffServ configuration is retained and can be changed, but
it is not activated. When enabled, Diffserv services are activated.
Command Syntax
[no] diffserv

Monitoring DiffServ

The following group of "show" commands is available for monitoring the settings of class-maps and
policy-maps, and service policies (assignments to interfaces):
• show class-map: See
• show diffserv: See
• show diffserv service: See
• show diffserv service brief: See
• show policy-map: See
• show policy-map
• show service-policy: See
This information can be displayed in either summary or detailed formats. The status information is only
shown when the DiffServ administrative mode is enabled; it is suppressed otherwise.

Using the show class-map Command

Displaying class-map information:
184 | Quality of Service
Command Mode Usage
Global Config This command sets the DiffServ operational mode to inactive. While
disabled, the DiffServ configuration is retained and can be changed,
but it is not activated. When enabled, Diffserv services are activated.
Using the show class-map Command on page
Using the show diffserv Command on page
Using the show diffserv Command on page
Using the show diffserv Command on page
Using the "show policy-map" Command on page
: See Figure 12-148 on page
interface
Using the show service-policy Command on page
This command sets the DiffServ
diffserv.
184.
186.
186.
186.
187.
190.
190.