Map The Iso File On A Scaleio Ready Node Server; Prepare The Servers For Deployment - Dell EMC ScaleIO Ready Node 14G Manual

Installing the Operating System

Map the ISO file on a ScaleIO Ready Node server

Prepare the servers for deployment

Hardware Configuration and Operating System Installation Guide - ESXi Servers
30
After you finish
Close the web browser and proceed to
server on page 30.
Map the ISO file on a server in a ScaleIO Ready Node system.
Before you begin
Ensure that you can access the console.
Procedure
1. Open the KVM console, using the Launch link.
2. In the DELL System Setup screen, select Virtual Media
Media.
The Initializing connection screen is displayed with a connecting message.
You may have to wait for some time for the connecting message to finish.
3. In the DELL System Setup screen, select Virtual Media
4. From the Virtual Media - Map CD/DVD screen, browse and set up the ISO file
and then click Map Device.
5. To verify the ISO file selection, click Virtual Media and view the ISO selection
in the drop down list.
6. Reset the server:
a. In the main DELL System Setup console window, select Power
System (warm boot) to display the list of keyboard keys with related
functionality.
b. Press F11. The Boot Manager Main Menu pane is displayed.
c. SelectOne-shot BIOS Boot Menu. The Select Legacy Boot Option pane is
displayed.
d. Select Virtual Optical Drive.
e. Proceed to

Prepare the servers for deployment

The server boots using the OS ISO file and finishes the installation.
7. If the node contains a factory-installed OS, the datastores will not be visible in
the vSphere Web Client. The BOSS card is partitioned, and the OS is installed in
the visible partition. To use the remaining storage on the BOSS card for the
datastore, perform the following steps:
a. In the vSphere Web Client, select Storage
VMFS datastore.
b. Select the empty partition for the datastore.
Datastore 1 is created on the empty BOSS card.
Before deploying ScaleIO on ESXi servers, you must prepare the servers.
Before you begin
Ensure that you have:
Map the ISO file on a ScaleIO Ready Node
on page 30.
New Datastore
>
Connect Virtual
>
Map CD/DVD.
>
Reset
>
Create New
>