Port Aggregator - Dell PowerEdge M420 Reference Manual

Command
lacp system-priority
lacp timeout
no lacp
port-channel min-links
show interfaces port-
channel
show lacp
show statistics port-
channel
a. For the meaning of each Mode abbreviation, see Mode Types on page 77.

Port Aggregator

Command
add ethernet
duplex
minimum active uplinks
mtu disable
negotiation
port-aggregator group
100
Command Groups
Description
Configures the system LACP priority.
Assigns an administrative LACP timeout.
Sets the LACP (Link Aggregation) mode to
default for that Aggregator Group.
Sets the minimum number of links that must
be up in order for the port channel interface
to be declared up.
Displays port-channel information.
Displays LACP information for ports.
Displays port-channel statistics.
Description
Adds member Ethernet port(s) to
the Aggregator Group.
Configures the full/half duplex
operation of all member ports in the
aggregator group/zone.
Sets the minimum number of
uplinks to be active for the Group.
Sets the mtu size to default (1518)
on all the member ports in the
aggregator group/zone.
Enables auto-negotiation of all
member ports in the aggregator
group/zone.
Enters Port Aggregator mode to
configure aggregator group
attributes.
a
Mode
GC
IC
PA
IC
PE
PE
PE
a
Mode
PA
PA
PA
PA
PA
GC