Dell PowerEdge M420 Reference Manual page 93

Command
ip igmp snooping querier
version
show igmp snooping
querier
a. For the meaning of each Mode abbreviation, see Mode Types on page 77.
IP Addressing
Command
clear host
clear ip address-conflict-
detect
interface out-of-band
ip address-conflict-detect
run
ip address dhcp
ip default-gateway
ip domain-lookup
ip domain-name
ip host
ip name-server
ipv6 address
ipv6 address dhcp
ipv6 enable
Description
Sets the IGMP version of the query that the
snooping switch is going to send periodically.
Displays IGMP Snooping Querier information. PE
Description
Deletes entries from the host name-to-address
cache.
Clears the address conflict detection status in
the switch.
Brings up the OOB port configuration menu.
Triggers the switch to run active address conflict
detection by sending gratuitous ARP packets for
IPv4 addresses on the switch.
Acquires an IP address on an interface from the
DHCP server.
Defines a default gateway (router).
Enables IP DNS-based host name-to-address
translation.
Defines a default domain name to complete
unqualified host names.
Configures static host name-to-address
mapping in the host cache.
Configures available name servers.
Set the IPv6 address of the management
interface.
Enables the DHCPv6 client on an IPv6
interface.
Enable IPv6 on the management interface.
Command Groups
a
Mode
GC
a
Mode
PE
PE
GC
GC
IC
GC
GC
GC
GC
GC
GC
IC
GC
93