Link Aggregation Control Protocol (Lacp); Overview; Commands; Clear Lacp Counters - Dell Force10 MXL Blade Reference Manual

Link Aggregation Control Protocol (LACP)

Overview

This chapter contains commands for Dell Force10's implementation of the link aggregation control
protocol (LACP) for the creation of dynamic link aggregation groups (LAGs — called port-channels
in FTOS parlance). For static LAG commands, refer to the section
Interfaces chapter), based on the standards specified in the IEEE 802.3 Carrier sense multiple access
with collision detection (CSMA/CD) access method and physical layer specifications.

Commands

Use the following commands for LACP:
•
•
•
•
•
•
•
•

clear lacp counters

Clear Port Channel counters.
Syntax
clear lacp port - channel-number counters
Parameters
port - channel-number
Defaults Without a Port Channel specified, the command clears all Port Channel counters.
Command Modes EXEC
EXEC Privilege
Command
Version 8.3.16.1
History
clear lacp counters
debug lacp
lacp long-timeout
lacp port-priority
lacp system-priority
port-channel mode
port-channel-protocol lacp
show lacp
Introduced on MXL 10/40GbE Switch IO Module
Enter a port-channel number:
Range: 1 to 128
17
Port Channel Commands
Link Aggregation Control Protocol (LACP) | 331
in the