Device Settings; Dell Lifecycle Controller; Embedded System Management; Boot Manager - Dell E31S Series Owner's Manual

1. Click iDRAC Settings > Thermal.
2. Under SYSTEM THERMAL PROFILE > Thermal Profile, select one of the following options:
• Default Thermal Profile Settings
• Maximum Performance (Performance Optimized)
• Minimum Power (Performance per Watt Optimized)
3. Under USER COOLING OPTIONS, set the Fan Speed Offset, Minimum Fan Speed, and Custom Minimum Fan Speed.
4. Click Back > Finish > Yes.
Related reference
iDRAC Settings utility

Device Settings

Device Settings enables you to configure device parameters.
Related reference
System BIOS

Dell Lifecycle Controller

Dell Lifecycle Controller (LC) provides advanced embedded systems management capabilities including system deployment, configuration,
update, maintenance, and diagnosis. LC is delivered as part of the iDRAC out-of-band solution and Dell system embedded Unified
Extensible Firmware Interface (UEFI) applications.
Related reference

Embedded system management

Embedded system management
The Dell Lifecycle Controller provides advanced embedded systems management throughout the system's lifecycle. The Dell Lifecycle
Controller can be started during the boot sequence and can function independently of the operating system.
NOTE: Certain platform configurations may not support the full set of features provided by the Dell Lifecycle Controller.
For more information about setting up the Dell Lifecycle Controller, configuring hardware and firmware, and deploying the operating
system, see the Dell Lifecycle Controller documentation at Dell.com/idracmanuals.
Related reference
Dell Lifecycle Controller

Boot Manager

The Boot Manager screen enables you to select boot options and diagnostic utilities.
Related tasks
Viewing Boot Manager
Related reference
Boot Manager main menu
System BIOS
52 Pre-operating system management applications