Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual page 152

JUNOS 10.1 Network Interfaces Configuration Guide
Table 8: Statements for Physical Interface Properties (continued)
Statement
clocking clock-source
clocking-mode (dce | internal |
loop)
clock-rate rate
compatibility-mode mode
compression
control-polarity (negative | positive)
control-signal (assert | de-assert |
normal)
core-dump | no-core-dump)
cts (ignore | normal | require)
cts-polarity (negative | positive)
current margin
dcd (ignore | normal | require)
dcd-polarity (negative | positive)
dce
dce-options
default-chap-secret name
description text
dialer-options
82
Physical Interfaces Properties Statements List
Interface Types
ATM, DS0, E1, E3, SONET/SDH, T1, and
T3 interfaces
Serial interfaces (EIA-530 and V.35)
Serial interfaces (EIA-530 and V.35)
E3 and T3 interfaces
Interfaces with PPP encapsulation
Serial interfaces (X.21)
Serial interfaces (X.21)
Adaptive services, monitoring services,
and collector interfaces
Serial interfaces (EIA-530 and V.35)
Serial interfaces (EIA-530 and V.35)
ATM interfaces on J Series routers
Serial interfaces (EIA-530 and V.35)
Serial interfaces (EIA-530 and V.35)
Interfaces with Frame Relay encapsulation
Serial interfaces (EIA-530, V.35, and X.21)
on J Series routers
Interfaces with Point-to-Point Protocol
(PPP) encapsulation
All
ISDN interfaces
Usage Guidelines
"Configuring the Clock Source" on page 140
"Configuring the Serial Clocking Mode" on
page 275
"Configuring the DTE Clock Rate" on
page 276
"Configuring the E3 CSU Compatibility
Mode" on page 571 and "Configuring the
T3 CSU Compatibility Mode" on page 590
"Configuring the PPP Protocol Field
Compression" on page 133
"Configuring Serial Signal Polarities" on
page 281
"Configuring the Serial Signal Handling"
on page 278
"Configuring Multiservice Physical
Interface Properties" on page 150
"Configuring the Serial Signal Handling"
on page 278
"Configuring Serial Signal Polarities" on
page 281
"Configuring SHDSL Operating Mode on
an ATM Physical Interface" on page 372
"Configuring the Serial Signal Handling"
on page 278
"Configuring Serial Signal Polarities" on
page 281
"Configuring the Router as a DCE" on
page 140
"Configuring the Serial Signal Handling"
on page 278
"Configuring a Default CHAP Secret" on
page 125
"Adding an Interface Description to the
Configuration" on page 108
"Configuring ISDN Physical Interface
Properties" on page 873