Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual page 145

mlfr-uni-nni-bundle-options {
acknowledge-retries number;
acknowledge-timer milliseconds;
action-red-differential-delay (disable-tx | remove-link);
cisco-interoperability send-lip-remove-link-for-link-reject;
drop-timeout milliseconds;
fragment-threshold bytes;
hello-timer milliseconds;
link-layer-overhead percent;
lmi-type (ansi | itu);
minimum-links number;
mrru bytes;
n391 number;
n392 number;
n393 number;
red-differential-delay milliseconds;
t391 seconds;
t392 seconds;
yellow-differential-delay milliseconds;
encapsulation type;
}
modem-options {
dialin (console | routable);
init-command-string initialization-command-string;
}
mtu bytes;
multiservice-options {
(core-dump | no-core-dump);
(syslog | no-syslog);
(dump-on-flow-control);
}
native-vlan-id number;
no-gratuitous-arp-request;
no-keepalives;
no-partition {
interface-type type;
}
optics-options {
wavelength nm;
alarmalarm-name {
(syslog | link-down);
}
warningwarning-name {
(syslog | link-down);
}
}
partition partition-number oc-slice oc-slice-range interface-type type;
timeslots time-slot-range;
passive-monitor-mode;
per-unit-scheduler;
ppp-options {
chap {
access-profile name;
default-chap-secret name;
local-name name;
passive;
Physical Interface Configuration Statements Overview
Chapter 3: Configuring Physical Interface Properties
75