Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual page 160

JUNOS 10.1 Network Interfaces Configuration Guide
Table 8: Statements for Physical Interface Properties (continued)
Statement
passive
passive-monitor-mode
path-trace trace-string
(payload-scrambler |
no-payload-scrambler)
periodic interval
per-unit-scheduler
pfc
pic-type (atm1 | atm2)
plp1 cells
plp-to-clp
policer cos-policer-name
pop-all-labels
ppp-options
premium
90
Physical Interfaces Properties Statements List
Interface Types
Interfaces with PPP encapsulation
SONET/SDH interfaces
10-Gigabit Ethernet interfaces in WAN
PHY mode and SONET/SDH interfaces
E3, SONET/SDH, and T3 interfaces
Aggregated Ethernet interfaces
IQ interfaces
Interfaces with PPP encapsulation
ATM2 IQ interfaces
ATM2 interfaces
ATM2 IQ interfaces
Gigabit Ethernet and Gigabit Ethernet IQ
and IQE PICs with SFPs (except the
10-port Gigabit Ethernet PIC and the
built-in Gigabit Ethernet port on the M7i
router)
ATM and SONET/SDH interfaces in passive
monitoring mode
Interfaces with PPP encapsulation
Enhanced Intelligent Queuing (IQE)
interfaces (hierarchical policer)
Usage Guidelines
"Configuring the PPP Challenge
Handshake Authentication Protocol" on
page 124
"Enabling Passive Monitoring on
SONET/SDH Interfaces" on page 929
"Configuring the SONET/SDH Path Trace
Identifier" on page 905 and "Configuring
SONET Options for 10-Gigabit Ethernet
Interfaces" on page 927
"Configuring E3 and T3 Parameters on
ATM Interfaces" on page 345, "Configuring
E3 HDLC Payload Scrambling" on
page 575, "Configuring SONET/SDH HDLC
Payload Scrambling" on page 906, and
"Configuring T3 HDLC Payload
Scrambling" on page 596
"Configuring Aggregated Ethernet LACP"
on page 649
JUNOS Services Interfaces Configuration
Guide
"Configuring the PPP Protocol Field
Compression" on page 133
"Configuring the ATM PIC Type" on
page 303
"Configuring ATM2 IQ VC Tunnel CoS
Components" on page 347
"Enabling the PLP Setting to Be Copied to
the CLP Bit" on page 356
"Configuring Gigabit Ethernet Policers" on
page 787
"Removing MPLS Labels from Incoming
Packets" on page 302 and "Removing MPLS
Labels from Incoming Packets" on
page 929
"Configuring the PPP Challenge
Handshake Authentication Protocol" on
page 124
"Applying Policers" on page 201 and JUNOS
Class of Service Configuration Guide