Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual page 144

JUNOS 10.1 Network Interfaces Configuration Guide
74
Physical Interface Configuration Statements Overview
classifier {
premium {
forwarding-class class-name {
loss-priority (high | low);
}
}
}
}
policer cos-policer-name {
aggregate {
bandwidth-limit bps;
burst-size-limit bytes;
}
premium {
bandwidth-limit bps;
burst-size-limit bytes;
}
}
}
}
}
(gratuitous-arp-reply | no-gratuitous-arp-reply);
hold-time up milliseconds down milliseconds;
interface-set interface-set-name {
interface ethernet-interface-name {
(unit unit-number | vlan-tags-outer vlan-tag);
}
}
isdn-options {
bchannel-allocation (ascending | descending);
calling-number number;
pool pool-name <priority priority>;
spid1 spid-string;
spid2 spid-string;
static-tei-val value;
switch-type (att5e | etsi | ni1 | ntdms100 | ntt);
t310 seconds;
tei-option (first-call | power-up);
}
keepalives <down-count number> <interval seconds> <up-count number>;
link-mode mode;
lmi {
lmi-type (ansi | itu);
n391dte number;
n392dce number;
n392dte number;
n393dce number;
n393dte number;
t391dte seconds;
t392dce seconds;
}
lsq-failure-options {
no-termination-request;
[ trigger-link-failure interface-name ];
}
mac mac-address;