Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual page 169

Expanding Interface Range Member and Member Range Statements
All
expanded to generate the final list of interface names for the specified interface
range.
Example: Expanding
Interface Range Member
and Member Range
Statements
protocols stp interface
protocols rstp interface
protocols mstp interface
protocols vstp interface
protocols mstp msti id interface
protocols mstp msti vlan id interface
protocols vstp vlan name interface
protocols gvrp interface
protocols igmp-snooping vlan name interface
protocols lldp interface
protocols lldp-med interface
protocols sflow interfaces
ethernet-switching-options analyzer name input [egress | ingress ] interface
ethernet-switching-options analyzer name output interface
ethernet-switching-options secure-access-port interface
ethernet-switching-options interfaces ethernet-switching-options voip interface
ethernet-switching-options redundant-trunk-group group g1 interface
ethernet-switching-options redundant-trunk-group group g1 interface
ethernet-switching-options bpdu-block interface
poe interface vlans pro-bng-mc1-bsd1 interface
member and member-range
[edit]
interfaces {
interface-range foo {
member-range ge-0/0/0 to ge-4/0/20;
member ge-10/1/1;
member ge-5/[0-5]/*;
/*Common config is added part of the interface-range definition*/
mtu 256;
hold-time up 10;
ether-options {
flow-control;
speed {
100m;
}
802.3ad primary;
}
Expanding Interface Range Member and Member Range Statements
Chapter 3: Configuring Physical Interface Properties
statements in an interface range definition are
99