Related Topics
Physical Interfaces Properties Statements List
Table 8 on page 79 lists statements that you can use to configure physical interfaces.
Table 8: Statements for Physical Interface Properties
Statement
802.3ad aex
access-profile name
accounting-profile name
acfc
acknowledge-retries number
acknowledge-timer milliseconds
loopback (local | payload | remote);
(mac | no-mac);
(payload-scrambler | no-payload-scrambler);
start-end-flag (filler | shared);
}
traceoptions {
flag flag <flag-modifier> <disable>;
}
transmit-bucket {
overflow discard;
rate percentage;
threshold bytes;
}
(traps | no-traps);
unidirectional;
vlan-tagging;
vlan-vci-tagging;
unit logical-unit-number {
logical-interface-statements;
}
}
}
Router Interfaces Overview on page 32
Interface Types
Aggregated Ethernet interfaces
Interfaces with Point-to-Point Protocol
(PPP) encapsulation
All
Interfaces with PPP encapsulation
Link services and voice services interfaces
Link services and voice services interfaces
Chapter 3: Configuring Physical Interface Properties
Usage Guidelines
"Aggregated Ethernet Interfaces
Overview" on page 643
"Configuring the PPP Challenge
Handshake Authentication Protocol" on
page 124
"Configuring Accounting for the Physical
Interface" on page 142
"Identifying the Access Concentrator" on
page 833
JUNOS Services Interfaces Configuration
Guide
JUNOS Services Interfaces Configuration
Guide
Physical Interfaces Properties Statements List
79