Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual page 154

JUNOS 10.1 Network Interfaces Configuration Guide
Table 8: Statements for Physical Interface Properties (continued)
Statement
ethernet-policer-profile
ethernet-switch-profile
facility-override facility-name
fastether-options
fcs (16 | 32)
feac-loop-respond |
no-feac-loop-respond)
flow-control | no-flow-control)
force
forwarding-class class-name
forwarding-class class-name
fragment-threshold bytes
framingframing-type
framing framing-type
framing framing-type
84
Physical Interfaces Properties Statements List
Interface Types
Gigabit Ethernet and Gigabit Ethernet IQ
and IQE PICs with SFPs (except the
10-port Gigabit Ethernet PIC, and the
built-in Gigabit Ethernet port on the M7i
router)
Gigabit Ethernet and Gigabit Ethernet IQ
and IQE PICs with SFPs (except the
10-port Gigabit Ethernet PIC, Aggregated
Ethernet with Gigabit Ethernet IQ
interfaces, and the built-in Gigabit Ethernet
port on the M7i router)
Adaptive services interfaces
Fast Ethernet interfaces
E1/E3, SONET/SDH, and T1/T3 interfaces
T3 interfaces
Aggregated Ethernet, Fast Ethernet, and
Gigabit Ethernet interfaces
SONET/SDH interfaces
ATM2 IQ interfaces
Gigabit Ethernet IQ interfaces
Multilink, link services, and voice services
interfaces
E1, E3, and T1 interfaces
10-Gigabit Ethernet interfaces
SONET interfaces
Usage Guidelines
"Configuring Gigabit Ethernet Policers" on
page 787
"Configuring Gigabit Ethernet Policers" on
page 787, "Configuring MAC Address
Filtering" on page 791, and Configuring the
Management Ethernet Interface
JUNOS Services Interfaces Configuration
Guide
"Ethernet Interfaces Overview" on
page 603
"Configuring the E1 Frame Checksum" on
page 563, "Configuring the E3 Frame
Checksum" on page 572, "Configuring the
SONET/SDH Frame Checksum" on
page 903, "Configuring the T1 Frame
Checksum" on page 581, and "Configuring
the T3 Frame Checksum" on page 592
"Configuring the T3 FEAC Response" on
page 593
"Configuring Flow Control" on page 613
"Configuring APS and MSP" on page 911
"Configuring ATM2 IQ VC Tunnel CoS
Components" on page 347
"Specifying an Output Priority Map" on
page 789
JUNOS Services Interfaces Configuration
Guide
"Configuring E3 and T3 Parameters on
ATM Interfaces" on page 345, "Configuring
E1 Framing" on page 563, and "Configuring
T1 Framing" on page 582
"10-Gigabit Ethernet Framing Overview"
on page 817
"Configuring SONET Options for
10-Gigabit Ethernet Interfaces" on page 927