Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual page 156

JUNOS 10.1 Network Interfaces Configuration Guide
Table 8: Statements for Physical Interface Properties (continued)
Statement
init-command-string
initialization-command-string;
input-priority-map
interface-type type
invert-data
isdn-options
keepalives <down-count number
<interval seconds> <up-count
number>
lacp mode
line-encoding (ami | b8zs)
line-protocol protocol
line-rate line-rate
linear-red-profile profile-name
linear-red-profiles profile-name
link-layer-overhead percent
link-mode mode
link-speed speed
link-speed speed
86
Physical Interfaces Properties Statements List
Interface Types
For USB ports ( ) on J4350 and J6350
umd0
Services Routers
Gigabit Ethernet IQ interfaces
Channelized IQ and IQE interfaces, ISDN
interfaces
DS0, E1, E3, and T1 interfaces
ISDN interfaces
Aggregated SONET/SDH, DS0, E1, E3,
SONET/SDH, T1, and T3 interfaces
Aggregated Ethernet interfaces
T1 interfaces
Serial interfaces (EIA-530, V.35, and X.21)
ATM interfaces on J Series routers
ATM2 interfaces
ATM2 interfaces
AS PIC link services IQ interfaces (
Management Ethernet ( or
fxp0
Fast Ethernet interfaces
Aggregated Ethernet interfaces
Aggregated SONET/SDH interfaces
Usage Guidelines
"Specifying a USB Modem Interface on J
Series Routers" on page 105
"Specifying an Input Priority Map" on
page 788
"Channelized Interfaces Overview" on
page 393 and "Configuring ISDN Physical
Interface Properties" on page 873
"Configuring E1 Data Inversion" on
page 564 , "Configuring E3 Data Inversion"
on page 573, and "Configuring T1 Data
Inversion" on page 581
"Configuring ISDN Logical Interface
Properties" on page 875
"Configuring Keepalives" on page 138
"Configuring Aggregated Ethernet LACP"
on page 649
"Configuring T1 Line Encoding" on
page 582
"Configuring the Serial Line Protocol" on
page 271
"Configuring SHDSL Operating Mode on
an ATM Physical Interface" on page 372
"Configuring ATM2 IQ VC Tunnel CoS
Components" on page 347
"Configuring ATM2 IQ VC Tunnel CoS
Components" on page 347
JUNOS Services Interfaces Configuration
lsq )
Guide
) and "Configuring the Link Characteristics" on
em0
page 109
"Configuring Aggregated Ethernet Link
Speed" on page 656
"Configuring Aggregated SONET/SDH Link
Speed" on page 938