Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual page 162

JUNOS 10.1 Network Interfaces Configuration Guide
Table 8: Statements for Physical Interface Properties (continued)
Statement
rfc-2615
rts (assert | de-assert | normal)
rts-polarity (negative | positive)
rtvbr peak rate sustained rate
burst length
scheduler-maps map-name
schedulers number
secondary sp-fpc/pic/port
services-options
serial-options
services priority-level
shdsl-options
size
shaping
snext margin
snr-margin
sonet-options
source-address-filter mac-address
92
Physical Interfaces Properties Statements List
Interface Types
SONET/SDH interfaces
Serial interfaces (EIA-530 and V.35)
Serial interfaces (EIA-530 and V.35)
ATM interfaces
ATM2 interfaces
Ethernet IQ2 and IQ2-E PICs port
interfaces
Redundant interfaces for adaptive services
interfaces ( rsp- )
Services interfaces
Serial interfaces (EIA-530, V.35, and X.21)
Adaptive services interfaces
ATM interfaces on J Series routers
All
ATM interfaces
ATM interfaces on J Series routers
ATM interfaces on J Series routers
SONET/SDH interfaces
Aggregated Ethernet, Fast Ethernet,
Tri-Rate Ethernet copper, and Gigabit
Ethernet interfaces
Usage Guidelines
"Configuring SONET/SDH RFC 2615
Support" on page 907
"Configuring the Serial Signal Handling"
on page 278
"Configuring Serial Signal Polarities" on
page 281
"Configuring ATM2 IQ Real-Time VBR" on
page 328
"Configuring ATM2 IQ VC Tunnel CoS
Components" on page 347
JUNOS Services Interfaces Configuration
Guide
JUNOS Services Interfaces Configuration
Guide
JUNOS Services Interfaces Configuration
Guide
"Serial Interfaces Overview" on page 269
JUNOS Services Interfaces Configuration
Guide
"Configuring SHDSL Operating Mode on
an ATM Physical Interface" on page 372
"Tracing Operations of the Interface
Process" on page 248
"Defining the ATM Traffic-Shaping Profile"
on page 326
"Configuring SHDSL Operating Mode on
an ATM Physical Interface" on page 372
"Configuring SHDSL Operating Mode on
an ATM Physical Interface" on page 372
"Configuring SONET/SDH Physical
Interface Properties" on page 896
"Enabling Ethernet MAC Address Filtering"
on page 610