Improvements; Comments" Renamed To "Change Log" In Save As Dialog; Include Safety Settings" Checked By Default; Omnicore Support For Irb 1200 - ABB RobotStudio 2022.1 Release Notes

Improvements

"Comments" renamed to "Change Log" in Save As dialog

In the Save As dialog, the text box label was changed from "Comments" to "Change Log" to clarify that
the text corresponds to a Change Log entry in the station information.

"Include safety settings" checked by default

The setting "Include safety settings" is now checked by default in the Unpack & Work wizard.

OmniCore support for IRB 1200

Added support for creating OmniCore virtual controllers for IRB 1200 in RobotStudio.

Permanently hide "View Robot at Target" notification

Added a button in the "View Robot at Target" notification menu to hide the notification permanently.
The notification can be restored by selecting "Restore hidden dialogs and messages" in Options.

Restart dialog after installing a package

The user will now be prompted to restart RobotStudio after installing a package from the add-ins tab.

Tooltip on Default Gateway in I/O Network dialog

Added a tooltip that informs the user that the default gateway can only be set from the 'Public network'
configuration and is shared between the public and the I/O network interfaces.

Visual SafeMove: Support for rotated CRB 15000 robot

Visual SafeMove now supports none zero gravity parameters in the Safety Configuration for CRB 15000
(GoFa). RobotWare 7.5 or higher is required.
© Copyright 2021 ABB. All rights reserved. 9/30