Mounting The Controller With 19" Rack Mounting Kit - ABB OmniCore E10 Product Manual

3.4.2 Mounting the controller with 19" rack mounting kit

General
The OmniCore E10 controller is designed to fit in a 19" cabinet.
xx2100001562
Required equipment
Equipment
Mounting kit
Standard toolkit
Product manual - OmniCore E10
3HAC079399-001 Revision: C
Note
If the controller is installed in a rack (cabinet), it must be fastened in a way that
prevents distortion of the controller cabinet. Preferably with angle bars along the
entire side edges of the controller.
© Copyright 2019-2022 ABB. All rights reserved.
3 Installation and commissioning
3.4.2 Mounting the controller with 19" rack mounting kit
Information
3HAC077631-001
See
page
Standard toolkit for controller on
202.
Continues on next page
53